NaturoPure HF 300D Multi-technology Air Purifier

Overview

• Ion/Power Button
  This button turns the NaturoPure^TM HF 300D HEPA & ionic air purifier "ON". The air ionizer (i.e. negative ion generator) is automatically engaged when the unit is in operation.


• Sanitizer/Ozone Button
  This button allows you to select the Off, Low, Medium, or High setting. Just hit the button until the LED light next to the desired setting is lit. When there are no LED lights lit next to the Sanitizer button, then the NaturoPure^TM HF 300D is "Off". When the off setting is chosen, the ozone vacuum tube produces no ozone, releasing virtually no ozone into the air at all. On low, the NaturoPure^TM HF 300D runs in intervals of 23 seconds "On", and 5 minutes and 37 seconds "Off". On medium, it runs in intervals of 2 minutes "On", and 4 minutes "Off". On the high setting, it runs continuously.


• Fan Speed/Air Flow
  There are three fan speed options: low, medium, and high.


• Timer
  The timer can be set to 1, 2, or 4 hours. If none of these timer settings are selected, the NaturoPure^TM HF 300D ionic air purifier will run continuously, which is generally best. If you are running the ozone on a high setting in a small area while you are not home, then you may want to use the timer to prevent the ozone level from reaching excessively high levels.


• Placement
  Since the NaturoPure^TM HF 300D HEPA & ionic air purifier uses a fan, and blows air strongly out the top of the unit, it is not necessary to place the unit at a high elevation. It can be placed on the floor, although the ideal elevation is 2-4 feet high. The room air filter will effectively draw air through the unit, even if placed on the floor.

features

• An Air Ionizer to remove allergens, bacteria, chemicals & other particles


• A Germicidal UV Lamp to destroy micro-organisms like germs, viruses, bacteria and mould


• A HEPA Air Filter which is 99.97% effective in removing particles such as dust and pet dander


• An Activated Carbon Filter to remove chemicals, gases, odours, cigarette and cooking smoke


• An Anti-Bacterial Pre-Filter which extends the life of other filters by removing larger particles


• Ozone Sanitizer Option to remove bacteria, odours, chemicals etc

SPECIFICATIONS

• Negative Ion Output: 12,000,000/cm3 (trillions per second)


• Filteration processes include prefilter, HEPA filter, Activated corbon filter, TiO^2 filter.


• UV Frequency: 254 nm, the ideal frequency for destroying DNA cells of micro-organisms.


• Noise Level: 35-56 dB


• Dimensions: 15" (W) x 13" (H) x 7.75" (D)


• Weight: 10 lbs.


• Cord Length: 72"


• Rated Voltage: 110 V AC / 60 Hz


• Power Consumption: 40 W


• Timer Option: 1, 2, and 4 Hours (If not set, will run continuously)

Technology for Every Pollutant

Technology for Every Pollutant

Dust/Dust Mites. Hepa air filters are highly effective at capturing.  Ionization also helps to remove from air. UV light can be deadly for dust mites.
Bacteria. Captured very effectively by Hepa air filters. Neutralized by negative ions & ozone sanitization.
Pollen/Allergens. Hepa air filter are commonly recommended filter for allergens. Negative ions effective at removing allergens from air.
Mold/Fungi. Hepa air filter highly effective at capturing spores, especially with help of negative ions. UV light deadly against toxins from mold. Ozone sanitization effective against mildew smell.
Cigarette Smoke. Carbon air filter absorbs smoke particles & chemicals, & reduces odors. Ionizer also removes smoke particles from air. Ozone & UV sanitization highly effective against strong smoke odors.
Chemicals. Carbon air filter effective at absorbing chemicals and gases. Ionizer & ozone sanitizer also help to neutralize.
Germs/Viruses. UV light deadly against micro-organisms such as germs/viruses. Negative ions also help to neutralize.

Pollutants Removed

• Solid Particles


• Smoke


• Dust/Dust Mites


• Dead Skin


• Pollens


• Insect Feces


• Mould Spores


• Animal/Pet Dander


• Chemicals


• Bacteria


• Micro-organisms


• Viruses


• Volatile Organic Compounds

• Solid Particles


• Smoke


• Dust/Dust Mites


• Dead Skin


• Pollens


• Insect Feces


• Mould Spores


• Animal/Pet Dander


• Chemicals


• Bacteria

• All organic chemicals and gases, and some other types of chemicals.


• Cigarette smoke


• Odours

Much less than replacement costs with other room air filters. Inexpensive to Operate. Costs less than $7 per month in electricity if run continuously.

Low sound, even on the high setting. Effectively circulates ions throughout an entire room (up to 500 sq. ft.), while drawing high volumes of particulate through the filter of NaturoPure^TM HF 300D.

Just Clean and Easy Air Filter Replacement. No cleaning is required, and replacing the 3-stage air filter and UV lamp is simple. Just pull off the front cover to remove and the filter. The UV lamp is right behind the filter, and is easily removed and replaced as well. No messes and no hassles.

The Multi-Tech NaturoPure^TM HF 300D air purifier has been awarded ETL certification (an alternative to UL and CSA) for product safety compliance, so you know that it is safe to use in your home or office.

Multiple Technologies to Attack Multiple Types of Pollutants

Two or more ways to remove almost every airborne pollutant:

• Pollen, Dust, Pet Dander and Other Allergens. Removed from air by HEPA filter, ionizer, & pre filter.


• Dust Mites. Removed from the air by HEPA filter & air ionizer, destroyed by UV light.


• Mould. Spores removed from air by HEPA filter & air ionizer, biologically deactivated UV light.


• Chemicals and Gases. Absorbed by activated carbon filter, some neutralized by air ionizer.


• Cigarette Smoke. Smoke particles removed by activated carbon filter and ionization, smell eliminated by activated carbon.


• Bacteria. Trapped by HEPA filter, removed and disinfected by ionizer, destroyed by UV light.


• Viruses. Destroyed by UV light & air ionizer.


• Strong Odours. Eliminated by activated carbon, & UV light.

Replacing the Filter

Studies

• Effectively removes particulate from the air, such as allergens (including mold and dust mites), fine dust particles, bacteria, viruses, chemical fumes and other ultra-fine particles that a filter cannot capture.


• Increases the effectiveness of the Hepa and activated carbon filter system by causing particles to magnetically attract together, resulting in larger particles that are easier for the filter to capture


• Disinfects viruses and bacteria trapped in the filtration bank of the NaturoPure^TM HF 300D that would normally reproduce in the typical filter.


• Has the ability to remove airborne particles away from the air purifier, in areas of the room where the filter has little effect. This is due to the fact that ions can circulate throughout a room. Negative ion circulation is enhanced as a result of the fan.

• Removes 99.97% of particles(.3 microns in size) that pass through the filter, preventing them from becoming into the air again. Largely considered the most effective type of air filter.


• Captures a high volume of floating dust and other particles, including many of the ionized particles that would otherwise just settle to the ground if a typical ionizer were used.

• UV (ultraviolet) light is scientifically proven to destroy a large variety of microbial contaminates, such as viruses, germs, bacteria and fungi (including mold).


• Ultraviolet light has been used for years by the medical field (including hospitals) to sanitize rooms and equipment, in order to prevent the spread of illness and disease.


• Recommended by Centers of Disease Control for its ability to destroy biological pollutants.

• Specializes in capturing and neutralizing chemicals, gases, odors and cigarette smoke, which the Hepa filter cannot capture.

• In the Heaven Fresh NaturoPure^TM HF 300D, the ozone can be completely disabled if it is not needed or wanted, while still allowing the ionizer and filters to run at full power.

• Preserves the life of other filters. The pre-filter captures the larger particles, so more pores can remain available in the activated carbon and HEPA air filters for the harder-to-remove pollutants.
  


• Destroys bacteria to help prevent them from reproducing and recirculating into the air.

Clinical Results

Hydrogen Sulfide (H₂S), a strong gas created by stagnant sewage, is one of the very worst, and most difficult-to-remove pollutants and odors known to man. An air purifier's ability to remove H₂S is a good indication of its ability to remove strong odors and volatile organic chemicals (VOCs), such as chemicals from building materials, carpeting & furniture, and toxic mold. In the same test, the Ionic Breeze Quadra reduced the H₂S by just 13%.

In a recent lab test, the Multi-Tech removed 99.5% of airborne particulate in a 128 cubic foot chamber (including 99% of the smallest range - 0.3 microns and smaller), designed to replicate the conditions in a typical room. This is more impressive than most removal rate percentages you see, since it measures the particles throughout an entire chamber outside the air purifier, and not just at the point where the air enters the air purifier, which is the common way of testing particle reduction.

The Multi-Tech Advantage - For Each Technology

The Multi-Tech NaturoPure ^TM HF 300D uses stainless steel ionizer pins, which are more durable than other ionizers. Besides durability, these ionizing pins produce a high negative ion output. The ionizer pins are located just inside the air outlet just above the fan, for maximum circulation throughout the room.

The Hepa air filter cartridge is preceded by an activated carbon air filter and anti-bacterial pre-filter. This design increases the life of the filter.

The Multi-Tech uses a "CCFL" (Cold Cathode) ultraviolet lamp, which lasts longer than other UV lamps. This powerful UV lamp is placed just behind the Hepa air filter, to destroy the bacteria captured by the Hepa air filter, preventing the reproduction of bacteria and lengthening the life of the filter.

The most important characteristic of the Multi-Tech XJ3000 ozone option is that it can be turned off, in case ozone is not desired. It can also be adjusted to High, Medium, or Low, to produce the right amount for the situation or environment.

The 3-speed fan is virtually silent on the low setting, for quiet and non-disturbing air purification. The fan can be turned to a higher setting for increased effectiveness.

The Multi-Tech offers cost savings in every aspect. This air purifier uses only 40 watts of power, saving as much as hundreds of dollars in electricity consumption each year compared to other electronic air filters.

Additional Benefits of the Multi-Tech Air Purifier

Ozone Can Be Turned Completely Off

Ozone is not always desired, or appropriate. Fortunately, the ozone can be completely disabled with the MULTI-TECH air purifier. It can also be set to Medium or Low for moderate ozone levels, and to High to remove strong odours. Air Filter Sterilization

Much less than replacement costs with other room air filters. Inexpensive to Operate. Costs less than $7 per month in electricity if run continuously.

Low sound, even on the high setting. Effectively circulates ions throughout an entire room (up to 500 sq. ft.), while drawing high volumes of particulate through the filter of NaturoPure^TM HF 300D.

Just Clean and Easy Air Filter Replacement. No cleaning is required, and replacing the 3-stage air filter and UV lamp is simple. Just pull off the front cover to remove and the filter. The UV lamp is right behind the filter, and is easily removed and replaced as well. No messes and no hassles.

The Multi-Tech NaturoPure^TM HF 300D air purifier has been awarded ETL certification (an alternative to UL and CSA) for product safety compliance, so you know that it is safe to use in your home or office.

ALL SPECIFICATIONS

• Combination Filter Cartridge: Consists of HEPA and activated carbon air filters


• HEPA Air Filter: Captures 99.97% of particles at 0.3 microns


• Activated Carbon Air Filter: High absorbency


• Replacement Frequency: 1-2 years


• Air Filter Cartridge Size: 11.25" x 5.25" x 4"

• Ozone Output Settings: Off, Low, Medium, High


• "Off" Setting: Ozone Completely Disabled


• "Low" Setting: Intervals of 30 sec. "ON" and 3 min. "OFF"


• "Medium" Setting: Intervals of 3 min. "ON" and 3 min. "OFF"


• "High" Setting: Continuously "ON"


• Ozone Output: 50 mg/hr on the high setting

• Ionization Method: Needlepoint (ion-producing electrode pins)


• Number of Needle points: 2 negative ion generators


• Needlepoint Composition: Stainless steel


• Negative Ion Output: 12,000,000/cm³ (trillions per second)


• Negative Ion Distribution: Air flow from fan

• UV Wavelength: UV-C, the short, germicidal range of the UV wavelength that is effective at destroying the DNA cell of micro-organisms.


• Nanometer Frequency: 254 nm, the ideal frequency for destroying DNA cells of micro-organisms.


• Ozone Production: Virtually zero, less than .008 ppm


• UV Lamp Life: 10,000 hours (over a year)

• Speed Settings: High, Medium, and Low


• Fan Speed: 71 cfm with filter installed (fan speed is higher without filter installed) (cfm = cubic feet per minute)


• Noise Level: 35-56 dB

• Square Footage Covered: 500 sq. ft.


• Heavy Pollution: Derate to 250 sq. ft. in heavily polluted environments

• Rated Voltage: 110 V AC / 60 Hz


• Power Consumption: 40 W


• Timer Option: 1, 2, and 4 Hours (If not set, will run continuously)


• Ozone Option: Off, Low, Medium, and High Settings (If not set, will not produce ozone)


• Power: On/Off


• Fan Speed: Low, Medium, High

• Dimensions: 15" (W) x 13" (H) x 7.75" (D)


• Weight: 10 lbs.


• Cord Length: 72"