Air Cleaners & Purifiers
Effective, safe, silent, affordable and no filters to replace!
The cost of a good air purification system does not have to be expensive to be effective. Heaven Fresh offers a perfect solution with its HF210UV air purifier. It is reasonably priced, inexpensive to operate and has low ongoing maintenance costs. The HF210UV comes from a line of innovative products designed to provide a healthy environment for you and your family.
No Filters to Replace. Proven to be Safe & Effective.
Just wipe clean the metal collector plates when dirty. You'll be amazed by how much is removed from the air! (Right)
Most Effective Way to Destroy Harmful Micro-Organisms. No air purification technology is more effective than a germicidal UV lamp when it comes to destroying germs, viruses, bacteria and fungi (such as mold), which can lead to illness.
Circulates air-cleaning negative ions. Found by the U.S. Dept. of Agriculture to be 99% effective against airborne dust & particles.
Proven Performance - Nearly 100% Effective in Clinical Particle Removal Tests.
Achieved a 99.5% removal rate of particles in a large chamber. This is not just hype, as test results are patter00ned closely after real-world conditions.
No Replacement Costs. Just wipe off the metal collector grid. Saves you hundreds in replacement filters over the life of the unit.
The built-in, independently-controlled fan effectively moves the air, increasing air-cleaning efficiency.
Costs Just Pennies a Day to Operate. Uses less electricity than a light bulb, saving you hundreds more over the life of the unit, compared to most air purifiers.
Whisper Quiet. The HF-210 is quiet, especially if the fan is turned "off".
1. Germicidal UV Lamp.
The air first sweeps past the germicidal ultraviolet light after entering the air inlet. The UV light is lethal against harmful, airborne micro-organisms such as germs, viruses, bacteria and fungi (such as mycotoxins from mold).
2. Collects Particles & Pollutants.
Airborne particles and pollutants are magnetically attracted to the metal dust collection plates, like a magnet. The built in fan, along with the electronic breeze, draw pollutants through the unit and its magnetically-charged plates. Then, you simply wipe the plates clean periodically, removing them from the environment. When the metal dust collection plates become full of particulate and residue, simply wipe them off with a damp cloth. Then, dry the plates and reinsert. It's that easy. The amount of contamination collected by the rag will give you and idea of how much airborne pollution is being removed. You Can Really See the Difference! Simply wipe the plates clean whenever
The dust collection plates should be cleaned about every 20-30 days, or when covered with dirt and residue. Cleaning the dust collection plates is very simple. First, twist the knob on the right hand side of the air purifier and pull the plates out. Second, wipe the plates off with a damp cloth. If there is difficult-to-remove residue on the plate, you should use a mild household cleaner, such as detergent, to help remove it. Third, dry the plates. Fourth, reinsert the plates back into the air purifier. Twist the handle to lock them in place and so that the unit will operate again. Please refer to the lock and unlock symbols on the handle of dust collection plate.
Note: When removing the collector plates for periodic cleaning, please note that it must be returned to the unit in exactly the same position for a flush fit. Reversing the position will result in an incomplete closure and the unit will not function properly.
Periodically, enough dust and particulate will accumulate on the tips of each pin, potentially weakening the performance of the air purifier. Every 2-3 months or if the HF 210UV starts making a loud hissing sound, zapping sound, or seems to be "sputtering", follow the instructions below to clean off the tips of each pin.
There are two flexible scraping pads at the end of dust collection plate. When you unlock and pull out the dust-collection plates, these two scrapers will brush against the ends of each pin, removing the dust and particulate. Repeat this process multiple times as needed.
Ionizer pins can also be cleaned thoroughly by removing the back panel which can be removed by pressing gently at the two arrow points and pulling in outward direction. The Stainless Steel bar with the ionizer pins in the front can be cleaned by using a brush preferably dipped in rubbing alcohol.
Note: When removing the back panel for periodic cleaning, please note that it must be returned to the unit in exactly the same position for a flush fit. Reversing the position will result in an incomplete closure and the unit will not function properly.
If the front grill has collected enough dust, the unit can generate sparks. The situation like this arises when Negative Ions generated by the needlepoints gets blocked by the dust collected on the front grill. To avoid this kind of situation, make sure the front grill has no visible sign of dust particles. If there is dust, then use a cleaning brush or a vacuum cleaner and remove the dust.
After removing the back panel, Interior can also be cleaned by using a duster or a blower. Dust particles could also accumulate near the fan and if not regularly cleaned, could cause unit to malfunction. Use brush or blower to remove dust around the fan.
All your small appliance needs can be met here on SHOP.CA thanks to the products of Heaven Fresh. Heaven Fresh® delivers innovative products from juicers to air purifiers for achieving and maintaining robust health through its commitment to researching the latest natural health technologies. This SHOP.CA supplier is driven by the philosophy that Mother Nature knows the human body best, and by replicating natural healing systems in our daily lives, we can live longer and healthier. At SHOP.CA our goal is that Canadians SHOP HAPPY. We hope you enjoy Heaven Fresh on SHOP.CA.
Continue Shopping:Heaven Fresh Air Purifiers