TT-50 - Tormek TT-50 Truing and Dressing Tool

Description

Safety & Protective Gear

Trues the Grindstone Exactly Round and Flat
Mounts and Locks Easily on the Universal Support
Without Pressing with your Thumbs Feed the Diamond Cutter across the Stone
Even and Flat Stone Suface with No Ridges
The Slower you Feed the Finer Surface you'll Achieve

1. Easy feeding across the stone
You can conveniently and without pressing with your thumbs feed the diamond cutter across the stone. You achieve an even feeding by alternately turning the two knobs with both your hands. The feed can be made in both directions.

2. Controlled cutting depth
The cutting depth is set exactly by the Micro Adjust on the Universal Support. New Universal Supports will have a scale with increments for each 025 mm or 001".

3. Increased steel removal
With a higher feed speed across the stone (approximately 30 seconds instead of 90 seconds) the surface will have pronounced grooves which will cause the stone to grind fast